Audi · Power Calculator

Audi A5 Mk3 - 2016 - 2018 2.0 TFSI 190hp Chip Tuning · Stage 1

Name: Audi A5 Mk3 - 2016 - 2018 2.0 TFSI 190hp Stage 1 Chip Tuning
Brand: Audi

How much bhp does Audi 2.0 TFSI 190hp (Mk3) chip tuning add?

Power goes from 190 bhp to 245 bhp — a gain of +55 bhp (29%). Torque rises from 320 Nm to 430 Nm.

Power190 → 245 bhp+55 bhp (+29%)

Torque320 → 430 Nm+110 Nm (+34%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap Stage 2 Remap Pop & Bang Speed Limiter (Vmax) Removal DTC / Fault Code Removal

Get a Quote

Audi A5 Mk3 - 2016 - 2018 2.0 TFSI 190hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Audi A5 Mk3 - 2016 - 2018 2.0 TFSI 190hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Stage 2 Remap

Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.

Pop & Bang

Software that creates exhaust crackle on lift-off.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

Audi A5 — Power Calculator

Engine	Power
2.0 TDI 150hp	150 → 190 bhp	+40 bhp
2.0 TDI 190hp	190 → 225 bhp	+35 bhp
2.0 TFSI 252hp	252 → 310 bhp	+58 bhp
2.0 TFSI G-Tron 170hp	—
3.0 TDI 218hp	218 → 290 bhp	+72 bhp
3.0 TDI 272hp	272 → 350 bhp	+78 bhp
3.0 TDI 286hp	286 → 350 bhp	+64 bhp

Frequently asked questions

How much bhp does Audi 2.0 TFSI 190hp (Mk3) chip tuning add?

Power goes from 190 bhp to 245 bhp — a gain of +55 bhp (29%). Torque rises from 320 Nm to 430 Nm.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Audi 2.0 TFSI 190hp (Mk3) chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.