Türkçe TREnglish ENDeutsch DEFrançais FR
Get a Quote
Audi · Power Calculator

Audi A5 Mk3 - 2016 - 2018 3.0 TDI 286hp Chip Tuning · Stage 1

How much bhp does Audi 3.0 TDI 286hp (Mk3) chip tuning add?

Power goes from 286 bhp to 350 bhp — a gain of +64 bhp (22%). Torque rises from 620 Nm to 750 Nm.

Power286 → 350 bhp+64 bhp (+22%)
Torque620 → 750 Nm+130 Nm (+21%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Get a Quote

Audi A5 Mk3 - 2016 - 2018 3.0 TDI 286hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Audi A5 Mk3 - 2016 - 2018 3.0 TDI 286hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Audi A5 Mk3 - 2016 - 2018 3.0 TDI 286hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. AdBlue / SCR Delete, NOx Sensor Delete ve EGR Delete arıza çözümlerinde doğrulanmış yazılım kullanılır.

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

Audi A5 — Power Calculator

EnginePower
2.0 TDI 150hp 150 → 190 bhp +40 bhp
2.0 TDI 190hp 190 → 225 bhp +35 bhp
2.0 TFSI 190hp 190 → 245 bhp +55 bhp
2.0 TFSI 252hp 252 → 310 bhp +58 bhp
2.0 TFSI G-Tron 170hp —
3.0 TDI 218hp 218 → 290 bhp +72 bhp
3.0 TDI 272hp 272 → 350 bhp +78 bhp

Frequently asked questions

How much bhp does Audi 3.0 TDI 286hp (Mk3) chip tuning add?
Power goes from 286 bhp to 350 bhp — a gain of +64 bhp (22%). Torque rises from 620 Nm to 750 Nm.
Will chip tuning damage the engine?
No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.
Will my fuel consumption go up?
With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.
How long does it take? Do I leave the car?
Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.
Can I go back to stock later?
Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.
Does it void my warranty?
Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.
Will it pass the roadworthiness test?
Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.
How much does Audi 3.0 TDI 286hp (Mk3) chip tuning cost?
Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.
How is the work done?
We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.
Is DPF Delete possible on the Audi 3.0 TDI 286hp (Mk3)?
Yes. Our library contains a verified DPF Delete solution for the Audi 3.0 TDI 286hp (Mk3). Once your original file is read, compatibility is checked and the job is applied.
⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.

Let's find the right solution for your vehicle

Send us your vehicle details and your nearest location will get back to you.

Get a Quote Find a centre