Audi A4 B6 - 2001 - 2004 1.8T 20v 150hp Stage 1 Chip Tuning · ECU Remap
Catalog reference — not a measured result for this vehicle.
Catalog reference: power 150 → 192 bhp, difference +42 bhp (28%); torque 210 → 310 Nm. Actual results depend on vehicle condition and measurement.
Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.
Get a Quote
Audi A4 B6 - 2001 - 2004 1.8T 20v 150hp
Book an appointment Find a centreReversible: Yes, the original software is kept
Audi A4 B6 - 2001 - 2004 1.8T 20v 150hp — Stage 1 Remap
Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.
Solutions for this vehicle
Audi A4 1.8T Stage 1: all generations →
Stage 1 Remap
Software that optimises the engine's power and torque maps within safe limits.
Stage 2 Remap
Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.
Pop & Bang
Software that creates exhaust crackle on lift-off.
Speed Limiter (Vmax) Removal
Removing the factory top-speed limiter from the software.
DTC / Fault Code Removal
Switching off selected diagnostic trouble codes (DTC) in the ECU software.
Where can this be done near you?
Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.
About the VW Group 1.8T 20V (EA113, five-valve turbo petrol)
The 1.8T 20V is the five-valves-per-cylinder turbo petrol engine VW Group used from the late 1990s to the mid-2000s in the Golf, Passat, Audi A3/A4/A6/TT, Seat Leon/Toledo and Skoda Octavia. Its tough cast-iron block and small turbo made it well known in the tuning world.
How a Stage 1 remap works on the Audi A4 B6 1.8T 20v 150hp
A Stage 1 remap recalibrates boost pressure, ignition timing and fuel maps together; torque rises clearly, especially in the mid-range. It stays within the limits of the original turbo (K03/K04) and keeps knock protection in place.
Pre-remap checklist
- Coil packs and spark plugs (coil failures are common on this family).
- Vacuum and boost hose leaks, crankcase ventilation (PCV) system.
- MAF sensor and lambda probe readings.
- Timing belt and water pump service history.
On older engines a service and a leak test are recommended before the remap.
This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.
ECUs used in Audi vehicles
If you know your ECU family, its page lists exactly which solutions are available for it.
Audi A4 — Power Calculator
| Engine | Power | Gain |
|---|---|---|
| 1.6i 102hp | 102 → 112 bhp | +10 bhp |
| 1.8T 20v 163hp | 163 → 200 bhp | +37 bhp |
| 1.8T 20v 190hp | 190 → 220 bhp | +30 bhp |
| 1.9 TDI 100hp | 100 → 140 bhp | +40 bhp |
| 1.9 TDI 115hp | 115 → 145 bhp | +30 bhp |
| 1.9 TDI 130hp | 130 → 170 bhp | +40 bhp |
| 2.0 FSI 150hp | 150 → 160 bhp | +10 bhp |
| 2.0i 130hp | 130 → 140 bhp | +10 bhp |
| 2.5 TDI 155hp | 155 → 190 bhp | +35 bhp |
| 2.5 TDI 163hp | 163 → 190 bhp | +27 bhp |
| 2.5 TDI 180hp | 180 → 210 bhp | +30 bhp |
| 3.0 V6 220hp | 220 → 235 bhp | +15 bhp |