Mercedes-Benz · Power Calculator

Mercedes-Benz GLC 2015 - 2019 220 CDI 163hp Stage 1 Chip Tuning · ECU Remap

Name: Mercedes-Benz GLC 2015 - 2019 220 CDI 163hp Stage 1 Chip Tuning
Brand: Mercedes-Benz

Catalog reference — not a measured result for this vehicle.

How much bhp does Mercedes-Benz GLC 220 CDI 163hp chip tuning add?

Catalog reference: power 163 → 220 bhp, difference +57 bhp (35%); torque 400 → 500 Nm. Actual results depend on vehicle condition and measurement.

Power163 → 220 bhp+57 bhp (+35%)

Torque400 → 500 Nm+100 Nm (+25%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Mercedes-Benz GLC 2015 - 2019 220 CDI 163hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Mercedes-Benz GLC 2015 - 2019 220 CDI 163hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Mercedes-Benz GLC 2015 - 2019 220 CDI 163hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Mercedes-Benz GLC 220 CDI 163hp AdBlue fault solution Mercedes-Benz GLC 220 CDI 163hp DPF fault solution Mercedes-Benz GLC 220 CDI 163hp EGR fault solution

Mercedes-Benz GLC 220 CDI Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Mercedes-Benz OM651 2.1 CDI (200 / 220 / 250 CDI, 2008–2018)

The OM651 is the 2.1-litre four-cylinder diesel of the post-2008 C, E, GLK, GLC, ML, Vito and Sprinter, offered from 136 to 204 hp. Most versions are twin-turbocharged and the hardware is largely shared across outputs.

How a Stage 1 remap works on the Mercedes-Benz GLC 220 CDI 163hp

Stage 1 recalibrates injection, rail pressure, boost and the torque limiter. The gain is especially clear on the 200 and 220 CDI outputs. A full low-rev torque curve results, matched to the 7G-Tronic or 9G-Tronic gearbox.

Pre-remap checklist

Injectors and injector seals (Delphi injector issue on early production).
Timing chain noise and tensioner condition.
DPF load and, where fitted, the AdBlue system.
EGR valve and swirl flap mechanism.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Mercedes-Benz vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

DELPHI CRD3 (ALL)BOSCH EDC16C31 BOSCH EDC17C66 BOSCH MD1CP001 DELPHI CRD2 (ALL)BOSCH EDC17C46 BOSCH EDC16 BOSCH EDC17C10 All ECU families →

Mercedes-Benz GLC — Power Calculator

Engine	Power	Gain
200 4MATIC 184hp	184 → 230 bhp	+46 bhp
220 CDI 170hp	170 → 220 bhp	+50 bhp
250 4MATIC 211hp	211 → 230 bhp	+19 bhp
250 CDI 204hp	204 → 240 bhp	+36 bhp
300 - 245hp	245 → 265 bhp	+20 bhp
350 CDI 258hp	258 → 300 bhp	+42 bhp
350e Hybrid 327hp	327 → 366 bhp	+39 bhp
43 AMG 367hp	367 → 420 bhp	+53 bhp
63 AMG 476hp	476 → 570 bhp	+94 bhp
63 AMG S 510hp	510 → 570 bhp	+60 bhp

Frequently asked questions

How much bhp does Mercedes-Benz GLC 220 CDI 163hp chip tuning add?

Catalog reference: power 163 → 220 bhp, difference +57 bhp (35%); torque 400 → 500 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Mercedes-Benz GLC 220 CDI 163hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Mercedes-Benz GLC 220 CDI 163hp?

Yes. Our library contains a verified DPF Delete solution for the Mercedes-Benz GLC 220 CDI 163hp. Once your original file is read, compatibility is checked and the job is applied.

What is checked on the Mercedes-Benz GLC 220 CDI 163hp before remapping?

Before working on the Mercedes-Benz OM651 2.1 CDI (200 / 220 / 250 CDI, 2008–2018) we check: Injectors and injector seals (Delphi injector issue on early production). Timing chain noise and tensioner condition. DPF load and, where fitted, the AdBlue system. EGR valve and swirl flap mechanism. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.