Audi · Power Calculator

Audi A4 B9 - 2015 - 2018 3.0 TDI Quattro 272hp Stage 1 Chip Tuning · ECU Remap

Name: Audi A4 B9 - 2015 - 2018 3.0 TDI Quattro 272hp Stage 1 Chip Tuning
Brand: Audi

Catalog reference — not a measured result for this vehicle.

How much bhp does Audi A4 B9 3.0 TDI Quattro 272hp chip tuning add?

Catalog reference: power 272 → 320 bhp, difference +48 bhp (18%); torque 600 → 680 Nm. Actual results depend on vehicle condition and measurement.

Power272 → 320 bhp+48 bhp (+18%)

Torque600 → 680 Nm+80 Nm (+13%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Audi A4 B9 - 2015 - 2018 3.0 TDI Quattro 272hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Audi A4 B9 - 2015 - 2018 3.0 TDI Quattro 272hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Audi A4 B9 - 2015 - 2018 3.0 TDI Quattro 272hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Audi A4 3.0 TDI Quattro 272hp AdBlue fault solution Audi A4 3.0 TDI Quattro 272hp DPF fault solution Audi A4 3.0 TDI Quattro 272hp EGR fault solution

Audi A4 3.0 TDI Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the VW Group 3.0 TDI V6

The 3.0 TDI V6 powers the Audi A4, A5, A6, A7, Q5, Q7, Porsche Cayenne, VW Touareg and Phaeton. Depending on generation it uses one or two turbochargers and leaves the factory with a conservative calibration.

How a Stage 1 remap works on the Audi A4 B9 3.0 TDI Quattro 272hp

Stage 1 rebalances boost, injection and torque maps for a substantial mid-range torque gain. On quattro and automatic cars the gearbox torque capacity is respected; towing and long-distance comfort improve markedly.

Pre-remap checklist

Intake manifold swirl flap motors and linkage.
Boost leaks and intercooler connections.
DPF and, where fitted, AdBlue system health.
Automatic gearbox oil condition.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Audi vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

BOSCH EDC17CP14 BOSCH EDC17C64 BOSCH MED17 BOSCH EDC17CP20 BOSCH EDC17C46 BOSCH EDC16 BOSCH EDC17CP44 BOSCH MD1CP004 All ECU families →

Audi A4 — Power Calculator

Engine	Power	Gain
1.4 TFSI 150hp	150 → 190 bhp	+40 bhp
2.0 TDI 122hp	122 → 190 bhp	+68 bhp
2.0 TDI 136hp	136 → 190 bhp	+54 bhp
2.0 TDI 150hp	150 → 190 bhp	+40 bhp
2.0 TDI 190hp	190 → 225 bhp	+35 bhp
2.0 TFSI 150hp	150 → 245 bhp	+95 bhp
2.0 TFSI 190hp	190 → 245 bhp	+55 bhp
2.0 TFSI 252hp	252 → 310 bhp	+58 bhp
3.0 TDI FWD 218hp	218 → 270 bhp	+52 bhp
3.0 TDI Quattro 218hp	218 → 310 bhp	+92 bhp

Frequently asked questions

How much bhp does Audi A4 B9 3.0 TDI Quattro 272hp chip tuning add?

Catalog reference: power 272 → 320 bhp, difference +48 bhp (18%); torque 600 → 680 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Audi A4 B9 3.0 TDI Quattro 272hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Audi A4 B9 3.0 TDI Quattro 272hp?

Yes. Our library contains a verified DPF Delete solution for the Audi A4 B9 3.0 TDI Quattro 272hp. Once your original file is read, compatibility is checked and the job is applied.

What is checked on the Audi A4 B9 3.0 TDI Quattro 272hp before remapping?

Before working on the VW Group 3.0 TDI V6 we check: Intake manifold swirl flap motors and linkage. Boost leaks and intercooler connections. DPF and, where fitted, AdBlue system health. Automatic gearbox oil condition. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.