Mercedes-Benz · Power Calculator

Mercedes-Benz E W212 - 2013 - 2016 300 CGi 252hp Stage 1 Chip Tuning · ECU Remap

Name: Mercedes-Benz E W212 - 2013 - 2016 300 CGi 252hp Stage 1 Chip Tuning
Brand: Mercedes-Benz

Catalog reference — not a measured result for this vehicle.

How much bhp does Mercedes-Benz E W212 300 CGi 252hp chip tuning add?

Catalog reference: power 252 → 312 bhp, difference +60 bhp (24%); torque 340 → 390 Nm. Actual results depend on vehicle condition and measurement.

Power252 → 312 bhp+60 bhp (+24%)

Torque340 → 390 Nm+50 Nm (+15%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap Stage 2 Remap Pop & Bang Speed Limiter (Vmax) Removal DTC / Fault Code Removal

Get a Quote

Mercedes-Benz E W212 - 2013 - 2016 300 CGi 252hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Mercedes-Benz E W212 - 2013 - 2016 300 CGi 252hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

Mercedes-Benz E 300 CGi Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Stage 2 Remap

Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.

Pop & Bang

Software that creates exhaust crackle on lift-off.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Mercedes-Benz 1.6 / 2.0 turbo petrol (M270 and M274: A180, A200, C180, C200, C250, E200, E250, GLC250)

Mercedes' post-2012 four-cylinder turbo petrols power the A, B, CLA, GLA, C, E, GLC and SLC from 122 to 245 hp. The 1.6 and 2.0 come from the same family, and hardware is largely shared between the C180, C200 and C250.

How a Stage 1 remap works on the Mercedes-Benz E W212 300 CGi 252hp

Stage 1 recalibrates boost, ignition and fuelling. Lower outputs such as the C180, E200 and A180 can approach the level of the output above; torque gains are felt from about 1,500 rpm. The 7G and 9G-Tronic torque limits are respected.

Pre-remap checklist

Ignition coils and spark plugs.
High-pressure fuel pump and injector health.
Turbo wastegate actuator and boost leaks.
Oil level; this engine is sensitive to oil consumption.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Mercedes-Benz vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

DELPHI CRD3 (ALL)BOSCH EDC16C31 BOSCH EDC17C66 BOSCH MD1CP001 DELPHI CRD2 (ALL)BOSCH EDC17C46 BOSCH EDC16 BOSCH EDC17C10 All ECU families →

Mercedes-Benz E — Power Calculator

Engine	Power	Gain
200 CDI 136hp	136 → 200 bhp	+64 bhp
200 CDI BlueTEC 136hp	136 → 200 bhp	+64 bhp
200 CGi 184hp	184 → 230 bhp	+46 bhp
220 CDI 170hp	170 → 220 bhp	+50 bhp
220 CDI BlueTEC 170hp	170 → 250 bhp	+80 bhp
250 CDI 204hp	204 → 240 bhp	+36 bhp
250 CDI BlueTec 204hp	204 → 240 bhp	+36 bhp
250 CGi 211hp	211 → 230 bhp	+19 bhp
300 CDI BlueTec Hybrid 231hp	231 → 260 bhp	+29 bhp
350 CDI 252hp	252 → 290 bhp	+38 bhp
350 CDI BlueTec 258hp	258 → 300 bhp	+42 bhp
350 CGi 306hp	306 → 320 bhp	+14 bhp

Frequently asked questions

How much bhp does Mercedes-Benz E W212 300 CGi 252hp chip tuning add?

Catalog reference: power 252 → 312 bhp, difference +60 bhp (24%); torque 340 → 390 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Mercedes-Benz E W212 300 CGi 252hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

What is checked on the Mercedes-Benz E W212 300 CGi 252hp before remapping?

Before working on the Mercedes-Benz 1.6 / 2.0 turbo petrol (M270 and M274: A180, A200, C180, C200, C250, E200, E250, GLC250) we check: Ignition coils and spark plugs. High-pressure fuel pump and injector health. Turbo wastegate actuator and boost leaks. Oil level; this engine is sensitive to oil consumption. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.