Ford · Power Calculator

Ford Focus MK4 LCI - 2022+ 1.5 EcoBlue 120hp Stage 1 Chip Tuning · ECU Remap

Name: Ford Focus MK4 LCI - 2022+ 1.5 EcoBlue 120hp Stage 1 Chip Tuning
Brand: Ford

Catalog reference — not a measured result for this vehicle.

How much bhp does Ford Focus MK4 LCI 1.5 EcoBlue 120hp chip tuning add?

Catalog reference: power 120 → 150 bhp, difference +30 bhp (25%); torque 300 → 368 Nm. Actual results depend on vehicle condition and measurement.

Power120 → 150 bhp+30 bhp (+25%)

Torque300 → 368 Nm+68 Nm (+23%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap Stage 2 Remap Pop & Bang Speed Limiter (Vmax) Removal DTC / Fault Code Removal

Get a Quote

Ford Focus MK4 LCI - 2022+ 1.5 EcoBlue 120hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Ford Focus MK4 LCI - 2022+ 1.5 EcoBlue 120hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

Solutions for this vehicle

Ford Focus 1.5 EcoBlue 120hp AdBlue fault solution Ford Focus 1.5 EcoBlue 120hp DPF fault solution Ford Focus 1.5 EcoBlue 120hp EGR fault solution

Ford Focus 1.5 Ecoblue Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Stage 2 Remap

Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.

Pop & Bang

Software that creates exhaust crackle on lift-off.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Ford 1.5 / 2.0 EcoBlue

EcoBlue is Ford's post-2016 diesel generation, used in the Focus, Kuga, Transit, Transit Custom, Ranger and Mondeo. It is Euro 6 compliant with AdBlue (SCR) and a DPF.

How a Stage 1 remap works on the Ford Focus MK4 LCI 1.5 EcoBlue 120hp

Stage 1 recalibrates rail pressure, injection duration, boost and the torque limiter. In commercial use pulling power under load and hill performance improve clearly; on passenger cars overtaking becomes more relaxed. Emissions systems are preserved in the calibration.

Pre-remap checklist

AdBlue system and NOx sensors working without faults.
DPF load and regeneration history.
EGR valve and cooler.
Oil service and belt condition.

AdBlue and DPF faults are diagnosed first; work on emissions hardware is considered only within the legal framework.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Ford vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

CONTINENTAL SID208 BOSCH EDC17C70 BOSCH EDC17C10 CONTINENTAL SID206 BOSCH EDC16C34 CONTINENTAL SID807 BOSCH MD1CS005 BOSCH MG1CS016 All ECU families →

Ford Focus — Power Calculator

Engine	Power	Gain
1.0 EcoBoost 125hp	125 → 150 bhp	+25 bhp
1.0 EcoBoost 155hp	155 → 186 bhp	+31 bhp

Frequently asked questions

How much bhp does Ford Focus MK4 LCI 1.5 EcoBlue 120hp chip tuning add?

Catalog reference: power 120 → 150 bhp, difference +30 bhp (25%); torque 300 → 368 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Ford Focus MK4 LCI 1.5 EcoBlue 120hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

What is checked on the Ford Focus MK4 LCI 1.5 EcoBlue 120hp before remapping?

Before working on the Ford 1.5 / 2.0 EcoBlue we check: AdBlue system and NOx sensors working without faults. DPF load and regeneration history. EGR valve and cooler. Oil service and belt condition. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.