Audi · Power Calculator

Audi A3 8V - MK3 - 2019+ 40 TFSI (2.0T) 190hp Stage 1 Chip Tuning · ECU Remap

Name: Audi A3 8V - MK3 - 2019+ 40 TFSI (2.0T) 190hp Stage 1 Chip Tuning
Brand: Audi

Catalog reference — not a measured result for this vehicle.

How much bhp does Audi A3 8V 40 TFSI (2.0T) 190hp chip tuning add?

Catalog reference: power 190 → 245 bhp, difference +55 bhp (29%); torque 320 → 430 Nm. Actual results depend on vehicle condition and measurement.

Power190 → 245 bhp+55 bhp (+29%)

Torque320 → 430 Nm+110 Nm (+34%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap Stage 2 Remap Pop & Bang Speed Limiter (Vmax) Removal DTC / Fault Code Removal

Get a Quote

Audi A3 8V - MK3 - 2019+ 40 TFSI (2.0T) 190hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Audi A3 8V - MK3 - 2019+ 40 TFSI (2.0T) 190hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

Solutions for this vehicle

Audi A3 40 TFSI (2.0T) 190hp Pop & Bang tuning

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Stage 2 Remap

Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.

Pop & Bang

Software that creates exhaust crackle on lift-off.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the turbocharged petrol engine

This vehicle uses a turbocharged petrol engine. On turbo petrols the ECU constantly adjusts boost pressure, ignition timing and mixture based on feedback from the knock sensors.

How a Stage 1 remap works on the Audi A3 8V 40 TFSI (2.0T) 190hp

A Stage 1 remap recalibrates boost targets, ignition and fuel maps together; mid-range torque rises clearly. Knock protection, exhaust temperature and turbo speed limits are kept.

Pre-remap checklist

Spark plugs and coils; they must not misfire under the higher load.
Leaks in the boost and intercooler hoses.
Fuel quality and recommended octane.
Intake valve carbon build-up on direct-injection engines.

The result depends on fuel quality and service condition; figures are confirmed by measurement.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Audi vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

BOSCH EDC17CP14 BOSCH EDC17C64 BOSCH MED17 BOSCH EDC17CP20 BOSCH EDC17C46 BOSCH EDC16 BOSCH EDC17CP44 BOSCH MD1CP004 All ECU families →

Audi A3 — Power Calculator

Engine	Power	Gain
30 TDI (1.6D) 116hp	116 → 140 bhp	+24 bhp
30 TFSi (1.0T) 116hp	116 → 130 bhp	+14 bhp
35 TDI (2.0D) 150hp	150 → 185 bhp	+35 bhp
35 TFSI (1.5T) 150hp	150 → 185 bhp	+35 bhp
40 TDI (2.0D) 184hp	184 → 220 bhp	+36 bhp

Frequently asked questions

How much bhp does Audi A3 8V 40 TFSI (2.0T) 190hp chip tuning add?

Catalog reference: power 190 → 245 bhp, difference +55 bhp (29%); torque 320 → 430 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Audi A3 8V 40 TFSI (2.0T) 190hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

What is checked on the Audi A3 8V 40 TFSI (2.0T) 190hp before remapping?

Before working on the turbocharged petrol engine we check: Spark plugs and coils; they must not misfire under the higher load. Leaks in the boost and intercooler hoses. Fuel quality and recommended octane. Intake valve carbon build-up on direct-injection engines. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.