BRAND
Mazda Chip Tuning
Mazda chip tuning raises engine power and torque. Our database holds 14 models and 97 engines for Mazda; the average Stage 1 gain is +20%. Pick your model below to see how much bhp you would gain.
ECU solutions for the Mazda
ECUs used in Mazda vehicles
Most viewed Mazda engines
| Engine | Power | Gain |
|---|---|---|
| CX-5 2.0 Skyactiv-G 165hp | 165 → 186 bhp | +21 bhp |
| 3 2.2 SkyActiv-D 150hp | 150 → 175 bhp | +25 bhp |
| 3 1.5 Skyactiv-D 105hp | 105 → 130 bhp | +25 bhp |
| CX-3 2.0 Skyactiv-G 120hp | 120 → 175 bhp | +55 bhp |
| CX-30 2.0 Skyactiv-G 122hp | 122 → 137 bhp | +15 bhp |
| CX-30 1.8 Skyactiv-D 115hp | 115 → 145 bhp | +30 bhp |
| 3 2.0 CiTD 143hp | 143 → 170 bhp | +27 bhp |
| 3 2.2 CiTD 185hp | 185 → 210 bhp | +25 bhp |
| CX-5 2.5 SkyActiv-G 192hp | 192 → 205 bhp | +13 bhp |
| 2 1.4 CiTD 68hp | 68 → 92 bhp | +24 bhp |
Frequently asked questions
How much bhp does Mazda chip tuning add?
Average Stage 1 power gain: +20%. Choose your engine.
Will chip tuning damage the engine?
No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.
Will my fuel consumption go up?
With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.
Can I go back to stock later?
Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.
⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.
For workshops
Prepare this file in your own workshop: ECU Prime
ECU Prime is chiptuning software that recognises the original ECU file you read with your tool and applies the operation you choose. The checksum is corrected in the same flow.