Ford · Power Calculator

Ford Kuga 2013 - 2016 2.0 TDCi 163hp Stage 1 Chip Tuning · ECU Remap

Name: Ford Kuga 2013 - 2016 2.0 TDCi 163hp Stage 1 Chip Tuning
Brand: Ford

Catalog reference — not a measured result for this vehicle.

How much bhp does Ford Kuga 2.0 TDCi 163hp chip tuning add?

Catalog reference: power 163 → 200 bhp, difference +37 bhp (23%); torque 340 → 415 Nm. Actual results depend on vehicle condition and measurement.

Power163 → 200 bhp+37 bhp (+23%)

Torque340 → 415 Nm+75 Nm (+22%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Ford Kuga 2013 - 2016 2.0 TDCi 163hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Ford Kuga 2013 - 2016 2.0 TDCi 163hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Ford Kuga 2013 - 2016 2.0 TDCi 163hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Ford Kuga 2.0 TDCi 163hp AdBlue fault solution Ford Kuga 2.0 TDCi 163hp DPF fault solution Ford Kuga 2.0 TDCi 163hp EGR fault solution

Ford Kuga 2.0 TDCi Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Ford 1.4 / 1.5 / 1.6 / 1.8 / 2.0 / 2.2 TDCi (Duratorq)

TDCi engines powered the Fiesta, Focus, C-Max, Mondeo, Kuga, Transit and Connect from the early 2000s to 2016. The 1.4, 1.5 and 1.6 TDCi are shared with PSA (DV series), the 1.8 TDCi is Ford's own design, and the 2.0 and 2.2 TDCi are the PSA-derived DW series.

How a Stage 1 remap works on the Ford Kuga 2.0 TDCi 163hp

Stage 1 recalibrates rail pressure, injection duration and boost according to the injection system of the version (Siemens, Delphi or Bosch). A full mid-range torque gain results; on vans such as the Transit, pulling power under load improves visibly.

Pre-remap checklist

Injector condition and injector seals (a known issue on the 1.8 TDCi).
DPF load and Eolys additive level (older 1.6 and 2.0 TDCi).
Turbo oil feed; turbo failure is common on the 1.6 TDCi.
EGR valve and dual-mass flywheel.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Ford vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

CONTINENTAL SID208 BOSCH EDC17C70 BOSCH EDC17C10 CONTINENTAL SID206 BOSCH EDC16C34 CONTINENTAL SID807 BOSCH MD1CS005 BOSCH MG1CS016 All ECU families →

Ford Kuga — Power Calculator

Engine	Power	Gain
1.5 EcoBoost 120hp	120 → 190 bhp	+70 bhp
1.5 EcoBoost 150hp	150 → 190 bhp	+40 bhp
1.5 EcoBoost 182hp	182 → 205 bhp	+23 bhp
1.6 EcoBoost 150hp	150 → 195 bhp	+45 bhp
1.6 EcoBoost 182hp	182 → 205 bhp	+23 bhp
1.6 TDCi 95hp	95 → 120 bhp	+25 bhp
2.0 EcoBoost 240hp	240 → 270 bhp	+30 bhp
2.0 TDCi 120hp	120 → 185 bhp	+65 bhp
2.0 TDCi 140hp	140 → 175 bhp	+35 bhp
2.0 TDCi 150hp	150 → 195 bhp	+45 bhp
2.0 TDCi 180hp	180 → 200 bhp	+20 bhp

Frequently asked questions

How much bhp does Ford Kuga 2.0 TDCi 163hp chip tuning add?

Catalog reference: power 163 → 200 bhp, difference +37 bhp (23%); torque 340 → 415 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Ford Kuga 2.0 TDCi 163hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Ford Kuga 2.0 TDCi 163hp?

Yes. Our library contains a verified DPF Delete solution for the Ford Kuga 2.0 TDCi 163hp. Once your original file is read, compatibility is checked and the job is applied.

What is checked on the Ford Kuga 2.0 TDCi 163hp before remapping?

Before working on the Ford 1.4 / 1.5 / 1.6 / 1.8 / 2.0 / 2.2 TDCi (Duratorq) we check: Injector condition and injector seals (a known issue on the 1.8 TDCi). DPF load and Eolys additive level (older 1.6 and 2.0 TDCi). Turbo oil feed; turbo failure is common on the 1.6 TDCi. EGR valve and dual-mass flywheel. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.