Mercedes-Benz · Power Calculator

Mercedes-Benz CLS C219 - 2004 - 2010 350 CDI 224hp Stage 1 Chip Tuning · ECU Remap

Name: Mercedes-Benz CLS C219 - 2004 - 2010 350 CDI 224hp Stage 1 Chip Tuning
Brand: Mercedes-Benz

Catalog reference — not a measured result for this vehicle.

How much bhp does Mercedes-Benz CLS C219 350 CDI 224hp chip tuning add?

Catalog reference: power 224 → 290 bhp, difference +66 bhp (29%); torque 540 → 600 Nm. Actual results depend on vehicle condition and measurement.

Power224 → 290 bhp+66 bhp (+29%)

Torque540 → 600 Nm+60 Nm (+11%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Mercedes-Benz CLS C219 - 2004 - 2010 350 CDI 224hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Mercedes-Benz CLS C219 - 2004 - 2010 350 CDI 224hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Mercedes-Benz CLS C219 - 2004 - 2010 350 CDI 224hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Mercedes-Benz CLS 350 CDI 224hp DPF fault solution Mercedes-Benz CLS 350 CDI 224hp EGR fault solution

Mercedes-Benz CLS 350 CDI Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Mercedes-Benz OM642 3.0 V6 CDI (280 / 300 / 320 / 350 CDI, BlueTEC)

The OM642 is the 3.0-litre V6 diesel of the Mercedes C, E, S, ML, GL, GLE, Vito and Sprinter, from 190 to 265 hp. BlueTEC versions are equipped with AdBlue. It is a refined, torque-focused engine.

How a Stage 1 remap works on the Mercedes-Benz CLS C219 350 CDI 224hp

Stage 1 recalibrates boost, injection and torque maps for a substantial mid-range torque gain. The automatic gearbox torque capacity is respected. Towing and long-distance performance improve markedly.

Pre-remap checklist

Oil cooler seals and turbo oil leaks, the known issue of this engine.
Intake manifold swirl flap mechanism.
DPF load and AdBlue system (BlueTEC).
Boost leaks and intercooler.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Mercedes-Benz vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

DELPHI CRD3 (ALL)BOSCH EDC16C31 BOSCH EDC17C66 BOSCH MD1CP001 DELPHI CRD2 (ALL)BOSCH EDC17C46 BOSCH EDC16 BOSCH EDC17C10 All ECU families →

Mercedes-Benz CLS — Power Calculator

Engine	Power	Gain
320 CDI 211hp	211 → 260 bhp	+49 bhp
320 CDI 224hp	224 → 260 bhp	+36 bhp
350 CDI 211hp	211 → 290 bhp	+79 bhp
350 CGI 292hp	292 → 312 bhp	+20 bhp
350i 272hp	272 → 292 bhp	+20 bhp
500 306hp	306 → 326 bhp	+20 bhp
500 388hp	388 → 408 bhp	+20 bhp
55 AMG 476hp	476 → 515 bhp	+39 bhp
63 AMG 514hp	514 → 530 bhp	+16 bhp

Frequently asked questions

How much bhp does Mercedes-Benz CLS C219 350 CDI 224hp chip tuning add?

Catalog reference: power 224 → 290 bhp, difference +66 bhp (29%); torque 540 → 600 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Mercedes-Benz CLS C219 350 CDI 224hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Mercedes-Benz CLS C219 350 CDI 224hp?

Yes. Our library contains a verified DPF Delete solution for the Mercedes-Benz CLS C219 350 CDI 224hp. Once your original file is read, compatibility is checked and the job is applied.

What is checked on the Mercedes-Benz CLS C219 350 CDI 224hp before remapping?

Before working on the Mercedes-Benz OM642 3.0 V6 CDI (280 / 300 / 320 / 350 CDI, BlueTEC) we check: Oil cooler seals and turbo oil leaks, the known issue of this engine. Intake manifold swirl flap mechanism. DPF load and AdBlue system (BlueTEC). Boost leaks and intercooler. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.