Mitsubishi · Power Calculator

Mitsubishi Spacestar 1.9 DiD 102hp Stage 1 Chip Tuning · ECU Remap

Name: Mitsubishi Spacestar 1.9 DiD 102hp Stage 1 Chip Tuning
Brand: Mitsubishi

Catalog reference — not a measured result for this vehicle.

How much bhp does Mitsubishi Spacestar 1.9 DiD 102hp chip tuning add?

Catalog reference: power 102 → 129 bhp, difference +27 bhp (26%); torque 215 → 275 Nm. Actual results depend on vehicle condition and measurement.

Power102 → 129 bhp+27 bhp (+26%)

Torque215 → 275 Nm+60 Nm (+28%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap Stage 2 Remap Pop & Bang Speed Limiter (Vmax) Removal DTC / Fault Code Removal

Get a Quote

Mitsubishi Spacestar 1.9 DiD 102hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Mitsubishi Spacestar 1.9 DiD 102hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

Solutions for this vehicle

Mitsubishi Spacestar 1.9 DiD 102hp DPF fault solution Mitsubishi Spacestar 1.9 DiD 102hp EGR fault solution

Mitsubishi Spacestar 1.9 DiD Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Stage 2 Remap

Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.

Pop & Bang

Software that creates exhaust crackle on lift-off.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Mitsubishi DI-D diesel (1.6, 1.8, 2.2, 2.3, 2.4 and 2.5 DI-D: L200, ASX, Outlander, Pajero)

Mitsubishi's common-rail diesels power the L200, ASX, Outlander, Lancer and Pajero. The PSA-derived 1.6 and 1.8 DI-D give 115–150 hp, the 2.2 and 2.3 DI-D 150–181 hp, and the 2.4 and 2.5 DI-D in the L200 and Pajero 136–181 hp.

How a Stage 1 remap works on the Mitsubishi Spacestar 1.9 DiD 102hp

Stage 1 recalibrates rail pressure, injection duration, boost and the torque limiter. On pick-ups such as the L200, pulling power under load and when towing improves clearly; on passenger cars overtaking becomes more relaxed. The automatic gearbox capacity is respected.

Pre-remap checklist

DPF load and regeneration history.
EGR valve and intake soot.
Boost leaks and variable-geometry actuator.
AdBlue system on the newer 2.2 and 2.4 (Euro 6).

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Mitsubishi vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

DENSO (ALL)BOSCH EDC17CP52 BOSCH EDC16C31 BOSCH EDC17C49 MITSUBISHI E6T (ALL)BOSCH EDC17CP15 BOSCH EDC16 BOSCH EDC16C39 All ECU families →

Mitsubishi Spacestar — Power Calculator

Engine	Power	Gain
1.9 DiD 115hp	115 → 142 bhp	+27 bhp

Frequently asked questions

How much bhp does Mitsubishi Spacestar 1.9 DiD 102hp chip tuning add?

Catalog reference: power 102 → 129 bhp, difference +27 bhp (26%); torque 215 → 275 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Mitsubishi Spacestar 1.9 DiD 102hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

What is checked on the Mitsubishi Spacestar 1.9 DiD 102hp before remapping?

Before working on the Mitsubishi DI-D diesel (1.6, 1.8, 2.2, 2.3, 2.4 and 2.5 DI-D: L200, ASX, Outlander, Pajero) we check: DPF load and regeneration history. EGR valve and intake soot. Boost leaks and variable-geometry actuator. AdBlue system on the newer 2.2 and 2.4 (Euro 6). If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.