Seat · Power Calculator

Seat Toledo 2013+ 1.4 TDI 90hp Stage 1 Chip Tuning · ECU Remap

Name: Seat Toledo 2013+ 1.4 TDI 90hp Stage 1 Chip Tuning
Brand: Seat

Catalog reference — not a measured result for this vehicle.

How much bhp does Seat Toledo 1.4 TDI 90hp chip tuning add?

Catalog reference: power 90 → 115 bhp, difference +25 bhp (28%); torque 230 → 280 Nm. Actual results depend on vehicle condition and measurement.

Power90 → 115 bhp+25 bhp (+28%)

Torque230 → 280 Nm+50 Nm (+22%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Seat Toledo 2013+ 1.4 TDI 90hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Seat Toledo 2013+ 1.4 TDI 90hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Seat Toledo 2013+ 1.4 TDI 90hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Seat Toledo 1.4 TDI 90hp DPF fault solution Seat Toledo 1.4 TDI 90hp EGR fault solution

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the VW Group 1.4 / 1.2 TDI (three-cylinder diesel)

The three-cylinder 1.4 TDI (older pump-injector and newer common-rail versions) and the 1.2 TDI are used in small models such as the Polo, Fabia, Ibiza, Rapid and A1. They are small-turbo engines designed for low consumption.

How a Stage 1 remap works on the Seat Toledo 1.4 TDI 90hp

A Stage 1 remap recalibrates injection quantity, injection pressure and boost pressure together. Low-rev pull improves clearly on the three-cylinder layout and the car feels more relaxed under load. Smoke and exhaust temperature limits are kept.

Pre-remap checklist

Injector condition and leak-off test (camshaft wear on pump-injector versions).
Oil or air leaks in the turbo and boost circuit.
On DPF versions, the differential pressure sensor and ash loading.
Clutch condition; the extra torque can cause slipping.

On small engines the service condition directly affects the result; diagnosis first, then software.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Seat vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

BOSCH MED17.5.X BOSCH EDC16 BOSCH EDC17CP14 BOSCH EDC17C64 BOSCH MG1CS011 DELPHI DCM6.2 CONTINENTAL PCR2.1 TEMIC DQ200 GEN2 All ECU families →

Seat Toledo — Power Calculator

Engine	Power	Gain
1.2 TSI 105hp	105 → 140 bhp	+35 bhp
1.2 TSI 85hp	85 → 140 bhp	+55 bhp
1.4 TSI 122hp	122 → 150 bhp	+28 bhp
1.4 TSI 125hp	125 → 150 bhp	+25 bhp
1.4 TSI 140hp	140 → 180 bhp	+40 bhp
1.6 TDI 105hp	105 → 140 bhp	+35 bhp
1.6 TDI 115hp	115 → 150 bhp	+35 bhp
2.0 TDI CR 150hp	150 → 190 bhp	+40 bhp

Frequently asked questions

How much bhp does Seat Toledo 1.4 TDI 90hp chip tuning add?

Catalog reference: power 90 → 115 bhp, difference +25 bhp (28%); torque 230 → 280 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Seat Toledo 1.4 TDI 90hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Seat Toledo 1.4 TDI 90hp?

Yes. Our library contains a verified DPF Delete solution for the Seat Toledo 1.4 TDI 90hp. Once your original file is read, compatibility is checked and the job is applied.

What is checked on the Seat Toledo 1.4 TDI 90hp before remapping?

Before working on the VW Group 1.4 / 1.2 TDI (three-cylinder diesel) we check: Injector condition and leak-off test (camshaft wear on pump-injector versions). Oil or air leaks in the turbo and boost circuit. On DPF versions, the differential pressure sensor and ash loading. Clutch condition; the extra torque can cause slipping. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.