Opel · Power Calculator

Opel Insignia 2017 - 2019 GSi 2.0 Turbo 260hp Stage 1 Chip Tuning · ECU Remap

Name: Opel Insignia 2017 - 2019 GSi 2.0 Turbo 260hp Stage 1 Chip Tuning
Brand: Opel

Catalog reference — not a measured result for this vehicle.

How much bhp does Opel Insignia GSi 2.0 Turbo 260hp chip tuning add?

Catalog reference: power 260 → 290 bhp, difference +30 bhp (12%); torque 400 → 480 Nm. Actual results depend on vehicle condition and measurement.

Power260 → 290 bhp+30 bhp (+12%)

Torque400 → 480 Nm+80 Nm (+20%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap Stage 2 Remap Pop & Bang Speed Limiter (Vmax) Removal DTC / Fault Code Removal

Get a Quote

Opel Insignia 2017 - 2019 GSi 2.0 Turbo 260hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Opel Insignia 2017 - 2019 GSi 2.0 Turbo 260hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

Solutions for this vehicle

Opel Insignia GSi 2.0 Turbo 260hp Pop & Bang tuning

Opel Insignia GSi Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Stage 2 Remap

Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.

Pop & Bang

Software that creates exhaust crackle on lift-off.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Opel 1.6 / 2.0 Turbo (Insignia, Astra OPC, Zafira, Cascada)

The 1.6 Turbo (A16LET, B16SHT) and 2.0 Turbo (A20NHT, A20NFT) power the Opel Insignia, Astra, Zafira Tourer, Cascada and OPC models from 170 to 280 hp. Direct-injection SIDI versions arrived after 2013.

How a Stage 1 remap works on the Opel Insignia GSi 2.0 Turbo 260hp

Stage 1 recalibrates boost, ignition and fuelling. The Insignia 2.0 Turbo 220 and 250 hp outputs share hardware, so the gain is clear. On automatic cars the torque limit is respected.

Pre-remap checklist

Ignition coils and spark plugs.
Boost leaks, bypass valve and intercooler.
Cooling system and thermostat.
Oil consumption (PCV on the 1.6 Turbo).

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Opel vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

BOSCH EDC17C59 BOSCH EDC16C9 BOSCH MD1CS003 BOSCH EDC17C19 DELCO E98 MARELLI MJD6 (ALL)BOSCH EDC16C39 BOSCH EDC17C18 All ECU families →

Opel Insignia — Power Calculator

Engine	Power	Gain
1.5 Turbo 140hp	140 → 180 bhp	+40 bhp
1.5 Turbo 165hp	165 → 180 bhp	+15 bhp
1.6 CDTI 110hp	110 → 140 bhp	+30 bhp
1.6 CDTI 136hp	136 → 160 bhp	+24 bhp
1.6 Turbo 200hp	200 → 220 bhp	+20 bhp
2.0 CDTI 170hp	170 → 195 bhp	+25 bhp
GSi 2.0 CDTI Bi-Turbo 210hp	210 → 240 bhp	+30 bhp

Frequently asked questions

How much bhp does Opel Insignia GSi 2.0 Turbo 260hp chip tuning add?

Catalog reference: power 260 → 290 bhp, difference +30 bhp (12%); torque 400 → 480 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Opel Insignia GSi 2.0 Turbo 260hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

What is checked on the Opel Insignia GSi 2.0 Turbo 260hp before remapping?

Before working on the Opel 1.6 / 2.0 Turbo (Insignia, Astra OPC, Zafira, Cascada) we check: Ignition coils and spark plugs. Boost leaks, bypass valve and intercooler. Cooling system and thermostat. Oil consumption (PCV on the 1.6 Turbo). If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.