Lancia · Power Calculator

Lancia Delta 2008+ 1.9 JTDm 190hp Stage 1 Chip Tuning · ECU Remap

Catalog reference — not a measured result for this vehicle.

How much bhp does Lancia Delta 1.9 JTDm 190hp chip tuning add?

Catalog reference: power 190 → 230 bhp, difference +40 bhp (21%); torque 400 → 460 Nm. Actual results depend on vehicle condition and measurement.

Power190 → 230 bhp+40 bhp (+21%)
Torque400 → 460 Nm+60 Nm (+15%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Get a Quote

Lancia Delta 2008+ 1.9 JTDm 190hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Lancia Delta 2008+ 1.9 JTDm 190hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Lancia Delta 2008+ 1.9 JTDm 190hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Fiat / Alfa Romeo / Opel 1.9 JTD / JTDM / CDTi

The 1.9 JTD is the four-cylinder common-rail diesel used throughout the 2000s in the Fiat Stilo, Bravo, Doblo, Alfa Romeo 147, 156, 159, GT, Opel Astra, Vectra, Zafira and Saab 9-3, in 8- and 16-valve forms from 100 to 150 hp.

How a Stage 1 remap works on the Lancia Delta 1.9 JTDm 190hp

Stage 1 recalibrates rail pressure, injection and boost. With its durable block the engine responds well; the mid-range torque gain is clear. On 16-valve versions the condition of the swirl flaps affects the result.

Pre-remap checklist

  • Swirl flap mechanism on 16-valve versions.
  • EGR valve cleanliness.
  • Boost leaks and variable-geometry vanes.
  • Dual-mass flywheel and clutch.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Lancia vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

Lancia Delta — Power Calculator

EnginePowerGain
1.4 Multiair 140hp 140 → 150 bhp +10 bhp
1.4 T-jet 120hp 120 → 155 bhp +35 bhp
1.4 T-jet 150hp 150 → 175 bhp +25 bhp
1.6 JTDm 105hp 105 → 140 bhp +35 bhp
1.6 JTDm 120hp 120 → 145 bhp +25 bhp
1.8 DI T-Jet 200hp 200 → 255 bhp +55 bhp
2.0 JTDm 165hp 165 → 190 bhp +25 bhp

Frequently asked questions

How much bhp does Lancia Delta 1.9 JTDm 190hp chip tuning add?
Catalog reference: power 190 → 230 bhp, difference +40 bhp (21%); torque 400 → 460 Nm. Actual results depend on vehicle condition and measurement.
Will chip tuning damage the engine?
No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.
Will my fuel consumption go up?
With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.
How long does it take? Do I leave the car?
Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.
Can I go back to stock later?
Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.
Does it void my warranty?
Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.
Will it pass the roadworthiness test?
Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.
How much does Lancia Delta 1.9 JTDm 190hp chip tuning cost?
Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.
How is the work done?
We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.
Is DPF Delete possible on the Lancia Delta 1.9 JTDm 190hp?
Yes. Our library contains a verified DPF Delete solution for the Lancia Delta 1.9 JTDm 190hp. Once your original file is read, compatibility is checked and the job is applied.
What is checked on the Lancia Delta 1.9 JTDm 190hp before remapping?
Before working on the Fiat / Alfa Romeo / Opel 1.9 JTD / JTDM / CDTi we check: Swirl flap mechanism on 16-valve versions. EGR valve cleanliness. Boost leaks and variable-geometry vanes. Dual-mass flywheel and clutch. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.
⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.

Let's find the right solution for your vehicle

Send us your vehicle details and your nearest location will get back to you.

Get a Quote Find a centre