Alfa Romeo · Power Calculator

Alfa Romeo Brera 2008 - 2011 2.0 JTDm 163hp Stage 1 Chip Tuning · ECU Remap

Name: Alfa Romeo Brera 2008 - 2011 2.0 JTDm 163hp Stage 1 Chip Tuning
Brand: Alfa Romeo

Catalog reference — not a measured result for this vehicle.

How much bhp does Alfa Romeo Brera 2.0 JTDm 163hp chip tuning add?

Catalog reference: power 163 → 195 bhp, difference +32 bhp (20%); torque 360 → 425 Nm. Actual results depend on vehicle condition and measurement.

Power163 → 195 bhp+32 bhp (+20%)

Torque360 → 425 Nm+65 Nm (+18%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Alfa Romeo Brera 2008 - 2011 2.0 JTDm 163hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Alfa Romeo Brera 2008 - 2011 2.0 JTDm 163hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Alfa Romeo Brera 2008 - 2011 2.0 JTDm 163hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Alfa Romeo Brera 2.0 JTDm 163hp DPF fault solution Alfa Romeo Brera 2.0 JTDm 163hp EGR fault solution

Alfa Romeo Brera 2.0 JTDm Stage 1: all generations →

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Fiat / Alfa Romeo 1.6 and 2.0 Multijet (JTDM)

The 1.6 and 2.0 Multijet power the Fiat Tipo, Bravo, Doblo, 500X, Alfa Romeo Giulietta, 159, Jeep Renegade and Compass, from 105 to 170 hp. They are Fiat's own modern common-rail engines, not PSA-derived.

How a Stage 1 remap works on the Alfa Romeo Brera 2.0 JTDm 163hp

Stage 1 recalibrates rail pressure, injection duration, boost and the torque limiter. A full mid-range torque gain results; on common versions such as the Tipo 1.6 Multijet overtaking confidence improves clearly. On DCT automatic cars the torque limit is respected.

Pre-remap checklist

DPF load and regeneration history.
EGR valve and cooler.
Boost leaks and intercooler hoses.
Dual-mass flywheel and clutch.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Alfa Romeo vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

BOSCH EDC16C39 BOSCH EDC17C69 BOSCH EDC16C8 BOSCH EDC16 BOSCH MED17.3.1 MARELLI MM10JA BOSCH ME7.9.10 BOSCH EDC17C49 All ECU families →

Alfa Romeo Brera — Power Calculator

Engine	Power	Gain
1750 TBI 200hp	200 → 255 bhp	+55 bhp
2.0 JTDm 170hp	170 → 195 bhp	+25 bhp
2.2 JTS 185hp	185 → 202 bhp	+17 bhp
2.4 JTDm 20V 200hp	200 → 240 bhp	+40 bhp
2.4 JTDm 20V 210hp	210 → 240 bhp	+30 bhp
3.2 JTS V6 260hp	260 → 270 bhp	+10 bhp

Frequently asked questions

How much bhp does Alfa Romeo Brera 2.0 JTDm 163hp chip tuning add?

Catalog reference: power 163 → 195 bhp, difference +32 bhp (20%); torque 360 → 425 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Alfa Romeo Brera 2.0 JTDm 163hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Alfa Romeo Brera 2.0 JTDm 163hp?

Yes. Our library contains a verified DPF Delete solution for the Alfa Romeo Brera 2.0 JTDm 163hp. Once your original file is read, compatibility is checked and the job is applied.

What is checked on the Alfa Romeo Brera 2.0 JTDm 163hp before remapping?

Before working on the Fiat / Alfa Romeo 1.6 and 2.0 Multijet (JTDM) we check: DPF load and regeneration history. EGR valve and cooler. Boost leaks and intercooler hoses. Dual-mass flywheel and clutch. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.