Land Rover Discovery 2004 - 2016 3.0 TDV6 245hp Stage 1 Chip Tuning · ECU Remap
Catalog reference — not a measured result for this vehicle.
Catalog reference: power 245 → 295 bhp, difference +50 bhp (20%); torque 600 → 660 Nm. Actual results depend on vehicle condition and measurement.
Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.
Get a Quote
Land Rover Discovery 2004 - 2016 3.0 TDV6 245hp
Book an appointment Find a centreReversible: Yes, the original software is kept
Land Rover Discovery 2004 - 2016 3.0 TDV6 245hp — Stage 1 Remap
Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.
Solutions for this vehicle
Land Rover Discovery 3.0 TDV6 Stage 1: all generations →
Stage 1 Remap
Software that optimises the engine's power and torque maps within safe limits.
Stage 2 Remap
Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.
Pop & Bang
Software that creates exhaust crackle on lift-off.
Speed Limiter (Vmax) Removal
Removing the factory top-speed limiter from the software.
DTC / Fault Code Removal
Switching off selected diagnostic trouble codes (DTC) in the ECU software.
Where can this be done near you?
Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.
About the Land Rover / Jaguar 2.2 TD4 / SD4 and 2.7 / 3.0 TDV6 / SDV6
The PSA-Ford-derived 2.2 diesel (TD4 / SD4) powered the Freelander 2, Evoque and Discovery Sport; the 2.7 and 3.0 V6 diesels (TDV6 / SDV6) the Discovery 3 and 4, Range Rover Sport, Jaguar XF and S-Type. They are torque-focused, heavy-duty engines.
How a Stage 1 remap works on the Land Rover Discovery 3.0 TDV6 245hp
Stage 1 recalibrates rail pressure, injection, boost and torque maps. The 150 hp 2.2 TD4 shares hardware with the SD4, so its gain is clear; the V6 diesels gain substantially in mid-range torque. The automatic gearbox capacity is respected.
Pre-remap checklist
- Crankshaft and oil service history on the 2.7 TDV6.
- Turbos and EGR coolers on the 3.0 SDV6.
- DPF load.
- Clutch / automatic gearbox and transfer case oil.
This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.
ECUs used in Land Rover vehicles
If you know your ECU family, its page lists exactly which solutions are available for it.
Land Rover Discovery — Power Calculator
| Engine | Power | Gain |
|---|---|---|
| 2.7 TDV6 190hp | 190 → 225 bhp | +35 bhp |
| 3.0 SDV6 256hp | 256 → 300 bhp | +44 bhp |
| 3.0 TDV6 211hp | 211 → 295 bhp | +84 bhp |