Jaguar · Power Calculator

Jaguar F Pace 2020+ 2.0 P400e 404hp Stage 1 Chip Tuning · ECU Remap

Name: Jaguar F Pace 2020+ 2.0 P400e 404hp Stage 1 Chip Tuning
Brand: Jaguar

Catalog reference — not a measured result for this vehicle.

How much bhp does Jaguar F Pace 2.0 P400e 404hp chip tuning add?

Catalog reference: power 404 → 455 bhp, difference +51 bhp (13%); torque — → — Nm. Actual results depend on vehicle condition and measurement.

Power404 → 455 bhp+51 bhp (+13%)

Torque— → — Nm

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap Stage 2 Remap Pop & Bang Speed Limiter (Vmax) Removal DTC / Fault Code Removal

Get a Quote

Jaguar F Pace 2020+ 2.0 P400e 404hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Jaguar F Pace 2020+ 2.0 P400e 404hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Stage 2 Remap

Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.

Pop & Bang

Software that creates exhaust crackle on lift-off.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ECUs used in Jaguar vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

BOSCH EDC17CP11 CONTINENTAL SID20X BOSCH MED17.1.9 BOSCH EDC17C42 BOSCH EDC17C08 BOSCH MEDC17.9 DENSO (ALL)BOSCH EDC17CP55 All ECU families →

Jaguar F Pace — Power Calculator

Engine	Power	Gain
2.0d MHEV 163hp	163 → 204 bhp	+41 bhp
2.0d MHEV 204hp	204 → 255 bhp	+51 bhp
2.0T 250hp	250 → 299 bhp	+49 bhp
3.0d MHEV 300hp	300 → 375 bhp	+75 bhp
3.0T MHEV 340hp	340 → 408 bhp	+68 bhp
3.0T MHEV 400hp	400 → 480 bhp	+80 bhp
5.0 V8 SVR 550hp	550 → 570 bhp	+20 bhp

Frequently asked questions

How much bhp does Jaguar F Pace 2.0 P400e 404hp chip tuning add?

Catalog reference: power 404 → 455 bhp, difference +51 bhp (13%); torque — → — Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Jaguar F Pace 2.0 P400e 404hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.