Nissan · Power Calculator

Nissan X-Trail 2018+ 1.3 DIG-T 160hp Stage 1 Chip Tuning · ECU Remap

Name: Nissan X-Trail 2018+ 1.3 DIG-T 160hp Stage 1 Chip Tuning
Brand: Nissan

Catalog reference — not a measured result for this vehicle.

How much bhp does Nissan X-Trail 1.3 DIG-T 160hp chip tuning add?

Catalog reference: power 160 → 190 bhp, difference +30 bhp (19%); torque 240 → 290 Nm. Actual results depend on vehicle condition and measurement.

Power160 → 190 bhp+30 bhp (+19%)

Torque240 → 290 Nm+50 Nm (+21%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap Stage 2 Remap Pop & Bang Speed Limiter (Vmax) Removal DTC / Fault Code Removal

Get a Quote

Nissan X-Trail 2018+ 1.3 DIG-T 160hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Nissan X-Trail 2018+ 1.3 DIG-T 160hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

Solutions for this vehicle

Nissan X-Trail 1.3 DIG-T 160hp Pop & Bang tuning

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Stage 2 Remap

Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.

Pop & Bang

Software that creates exhaust crackle on lift-off.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Nissan 1.2 / 1.3 DIG-T turbo petrol (Qashqai, Juke, X-Trail)

Nissan's small turbo petrols power the Qashqai, Juke, Pulsar and X-Trail: the post-2014 1.2 DIG-T (115 hp) and the post-2019 1.3 DIG-T developed with Mercedes (140–160 hp). They are the same engines as the Renault 1.2 and 1.3 TCe.

How a Stage 1 remap works on the Nissan X-Trail 1.3 DIG-T 160hp

Stage 1 recalibrates boost, ignition and fuelling. On the 1.3 DIG-T the 140 and 160 hp outputs share hardware; on the 1.2 DIG-T low-rev torque fills out noticeably. On CVT and DCT cars the torque limit is respected.

Pre-remap checklist

Ignition coils and spark plugs.
Boost leaks and wastegate.
Oil consumption and level on the 1.2 DIG-T.
Fuel octane rating.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Nissan vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

BOSCH EDC17C84 CONTINENTAL SID305/6 CONTINENTAL SID309 CONTINENTAL SID307 BOSCH EDC17C42 BOSCH EDC16CP33 CONTINENTAL SID321 BOSCH EDC16 All ECU families →

Nissan X-Trail — Power Calculator

Engine	Power	Gain
1.6 DCi 130hp	130 → 155 bhp	+25 bhp
1.6 DIG-T 163hp	163 → 190 bhp	+27 bhp
1.7 dCi 150hp	150 → 180 bhp	+30 bhp
2.0 DCi 177hp	177 → 205 bhp	+28 bhp

Frequently asked questions

How much bhp does Nissan X-Trail 1.3 DIG-T 160hp chip tuning add?

Catalog reference: power 160 → 190 bhp, difference +30 bhp (19%); torque 240 → 290 Nm. Actual results depend on vehicle condition and measurement.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Nissan X-Trail 1.3 DIG-T 160hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

What is checked on the Nissan X-Trail 1.3 DIG-T 160hp before remapping?

Before working on the Nissan 1.2 / 1.3 DIG-T turbo petrol (Qashqai, Juke, X-Trail) we check: Ignition coils and spark plugs. Boost leaks and wastegate. Oil consumption and level on the 1.2 DIG-T. Fuel octane rating. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.