Hidromek HMK 102B Backhoe Loader Tuning and Power Upgrade
The Hidromek HMK 102B is Hidromek's backhoe loader. The engine control unit (ECU) software is recalibrated on the machine's own original file; the original software is backed up.
Hidromek HMK 102B technical data
Each row states where the data comes from. “Manufacturer data” is the factory figure published by the manufacturer; figures after a remap are shown only where we have our own measurements and records. Estimated figures are not guaranteed results.
| Engine | Power | Torque | ECU | Read / write | Verification |
|---|---|---|---|---|---|
| HMK 102 B ALPHA Perkins 904J-E36TA 3,6 L · Stage V |
100 bhp | 430 Nm | — | — | Manufacturer data (factory figure) |
| HMK 102 B SUPRA Perkins 904J-E36TA 3,6 L · Stage V |
100 bhp | 430 Nm | — | — | Manufacturer data (factory figure) |
Hidromek HMK 102B power remap
A power remap on the Hidromek HMK 102B recalibrates the fuel quantity, injection timing, boost pressure and torque limiter maps. On a backhoe loader one engine feeds the front bucket, the rear excavator and the drivetrain; with more torque in reserve, rpm drops less when digging and roading.
Hidromek HMK 102B DPF, EGR and AdBlue fault solution
Backhoe loaders often sit idling between short jobs during the day; in these conditions the particulate filter (DPF) cannot clean itself and blocks. The EGR valve collects soot; with a NOx sensor or pump fault in the AdBlue (SCR) system the machine enters limp mode. The cause is diagnosed first; the software solution is applied according to the ECU type.
ECU and compatibility for the Hidromek HMK 102B
Services with a verified solution for Hidromek in our library: Stage 1 Remap, DPF Delete, EGR Delete and AdBlue / SCR Delete. The same model can carry a different ECU depending on build year and engine option, so we confirm compatibility for the Hidromek HMK 102B from a photo of the ECU label or from the file read out.
Where is the difference noticed on the Hidromek HMK 102B?
- Working in hard ground with the rear excavator
- Loading and grading with the front bucket
- Roading between sites and on hills
- Working with hydraulic attachments such as breakers
Services available for Hidromek (backhoe loader)
Stage 1 Remap
Software that optimises the engine's power and torque maps within safe limits.
DPF Delete
Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.
EGR Delete
Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.
AdBlue / SCR Delete
Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.