Toyota · Power Calculator

Toyota Verso S 2011+ 1.4 D-4D 90hp Stage 1 Chip Tuning · ECU Remap

Catalog reference — not a measured result for this vehicle.

How much bhp does Toyota Verso S 1.4 D-4D 90hp chip tuning add?

Catalog reference: power 90 → 115 bhp, difference +25 bhp (28%); torque 205 → 260 Nm. Actual results depend on vehicle condition and measurement.

Power90 → 115 bhp+25 bhp (+28%)
Torque205 → 260 Nm+55 Nm (+27%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Get a Quote

Toyota Verso S 2011+ 1.4 D-4D 90hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Toyota Verso S 2011+ 1.4 D-4D 90hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Toyota Verso S 2011+ 1.4 D-4D 90hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

OUTSIDE TÜRKİYE?

Where can this be done near you?

Prime Chiptuning applies the software at its own centres in Türkiye. Abroad, our partners carry out the work with the same files, and workshops can order the file directly.

ENGINE FAMILY

About the Toyota D-4D diesel (1.4, 2.0, 2.2, 2.4, 2.8)

D-4D engines are the common-rail diesels of the Toyota Yaris, Auris, Corolla, Verso, Avensis, RAV4, Hilux and Land Cruiser. The 1.4 D-4D gives 90 hp, the 2.0 and 2.2 D-4D 124–177 hp, and the Hilux 2.4 and 2.8 D-4D 150–204 hp.

How a Stage 1 remap works on the Toyota Verso S 1.4 D-4D 90hp

Stage 1 recalibrates rail pressure, injection duration, boost and the torque limiter. Thanks to Toyota's conservative factory tune, the Hilux and RAV4 in particular gain clearly in torque. The automatic gearbox capacity is respected.

Pre-remap checklist

  • DPF load and injector condition on the 2.0 / 2.2 D-4D.
  • EGR valve and intake soot.
  • Boost leaks.
  • AdBlue system on Euro 6 2.8 D-4D versions.

This section is based on Prime Chiptuning workshop experience; the power and torque figures come from the catalogue measurement above.

ECUs used in Toyota vehicles

If you know your ECU family, its page lists exactly which solutions are available for it.

Frequently asked questions

How much bhp does Toyota Verso S 1.4 D-4D 90hp chip tuning add?
Catalog reference: power 90 → 115 bhp, difference +25 bhp (28%); torque 205 → 260 Nm. Actual results depend on vehicle condition and measurement.
Will chip tuning damage the engine?
No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.
Will my fuel consumption go up?
With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.
How long does it take? Do I leave the car?
Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.
Can I go back to stock later?
Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.
Does it void my warranty?
Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.
Will it pass the roadworthiness test?
Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.
How much does Toyota Verso S 1.4 D-4D 90hp chip tuning cost?
Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.
How is the work done?
We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.
Is DPF Delete possible on the Toyota Verso S 1.4 D-4D 90hp?
Yes. Our library contains a verified DPF Delete solution for the Toyota Verso S 1.4 D-4D 90hp. Once your original file is read, compatibility is checked and the job is applied.
What is checked on the Toyota Verso S 1.4 D-4D 90hp before remapping?
Before working on the Toyota D-4D diesel (1.4, 2.0, 2.2, 2.4, 2.8) we check: DPF load and injector condition on the 2.0 / 2.2 D-4D. EGR valve and intake soot. Boost leaks. AdBlue system on Euro 6 2.8 D-4D versions. If something needs attention, maintenance comes first; the remap is applied to a healthy engine.
⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.

Let's find the right solution for your vehicle

Send us your vehicle details and your nearest location will get back to you.

Get a Quote Find a centre