New Holland TD5 AdBlue Fault Solution
We solve AdBlue (SCR) system faults on New Holland TD5 tractors with ECU software: NOx sensor errors, pump and heater faults, quality warnings and power derate. The cause of the fault is diagnosed first and the original software is backed up.

On tractors AdBlue faults are usually noticed in mid-season: lines crystallised after a long lay-up, heaters that fail after winter and NOx sensors affected by dust. Once the tractor goes into power derate it can no longer pull a plough or a baler.
The SCR system injects AdBlue (urea solution) into the exhaust to reduce nitrogen oxides. It consists of a tank, pump module, heater, dosing injector, NOx sensors and a control unit. When one of these parts fails the ECU first warns, then starts a countdown and, when it expires, limits power or speed.
The most common faults are the NOx sensor, a dosing injector and lines blocked by crystallisation, and heater and pump modules that fail in the cold. Poor-quality or diluted AdBlue also shows up as a quality fault. We identify which part is actually at fault by diagnosis and recommend the solution accordingly.
When is it needed?
- AdBlue warning and countdown
- Pump / injector / NOx sensor failure
- No-start lockout caused by a system fault
- High repair cost
Typical duration: 2–3 hours
New Holland AdBlue Fault Solution: supported control units
Control units for which our library holds a verified solution for this service on New Holland: BOSCH MD1CS069, BOSCH EDC17C49, BOSCH EDC7UC31, BOSCH MD1CE101, BOSCH EDC17CV41 and BOSCH EDC16. The same model can carry a different ECU depending on build year and engine option; we confirm compatibility from a photo of the ECU label or from the file read out.
AdBlue Fault Solution on other New Holland models
AdBlue Fault Solution for other makes
Send us this for a quick diagnosis
If you include the following when you message us on WhatsApp, we can confirm compatibility and the work needed the same day.
- Make, model and model year
- A photo of the dashboard warning or the fault code
- A photo of the engine ECU label
- When the fault started and what has been done so far
- For on-site service: province, district and location