Claas Xerion Tractor Tuning and Power Upgrade
The Claas Xerion is Claas's large field tractor range. The engine control unit (ECU) software is recalibrated on the machine's own original file; the original software is backed up.
Claas Xerion power remap
A power remap on the Claas Xerion recalibrates the fuel quantity, injection timing, boost pressure and torque limiter maps. Manufacturers sell the same engine block at several power levels within a range, so much of the difference between them is software. The calibration respects the limits of the cooling system, transmission and PTO.
Claas Xerion AdBlue fault solution
In the field, most faults come from the emission systems: a particulate filter (DPF) that fills up during low-rpm and short jobs, an EGR valve clogged with soot, and NOx sensor, pump or heater faults in the AdBlue (SCR) system. When these occur the tractor enters limp mode and work stops in the middle of harvest. The cause is diagnosed first; the software solution is applied according to the ECU type.
ECU and compatibility for the Claas Xerion
Services with a verified solution for Claas in our library: Stage 1 Remap, AdBlue / SCR Delete and DTC / Fault Code Removal. The control units we work on in Claas machines include BOSCH EDC17CV41, BOSCH EDC17C53, PHOENIX L16 and TEMIC ZGS SERİE. The same model can carry a different ECU depending on build year and engine option, so we confirm compatibility for the Claas Xerion from a photo of the ECU label or from the file read out.
Where is the difference noticed on the Claas Xerion?
- Heavy tillage with ploughs, chisels and subsoilers
- PTO-heavy work such as baling, forage harvesting and feed mixing
- Road haulage and hills with a loaded trailer
- Tractors whose engine is at its limit for the implement they pull