Peugeot Boxer · 2006+

Peugeot Boxer DPF Fault Solution

When the DPF (diesel particulate filter) clogs on Peugeot Boxer (2006+) diesel engines, the car regenerates frequently, power is limited and a warning lamp comes on. Differential pressure and fault memory are checked first, the ECU is identified and a matching software solution is applied after an original backup.

Book an appointment Peugeot Boxer: all engines & Stage 1

Suitable engines for the Peugeot Boxer

Year / chassis: 4th - 2012 - 2018

EnginePowerDPF fault solution
Peugeot Boxer 2.0 BlueHDI 110hp 110 → 200 bhp
Peugeot Boxer 2.0 BlueHDI 130hp 130 → 200 bhp
Peugeot Boxer 2.0 BlueHDI 160hp 160 → 200 bhp
Peugeot Boxer 2.2 HDi 110hp 110 → 200 bhp
Peugeot Boxer 2.2 HDi 130hp 130 → 180 bhp
Peugeot Boxer 2.2 HDi 150hp 150 → 180 bhp
Peugeot Boxer 2.2 HDi 160hp 160 → 185 bhp
Peugeot Boxer 3.0 HDi 180hp 180 → 215 bhp

Year / chassis: 3th - 2006 - 2012

EnginePowerDPF fault solution
Peugeot Boxer 2.2 HDi 100hp 100 → 150 bhp
Peugeot Boxer 2.2 HDi 120hp 120 → 150 bhp
Peugeot Boxer 2.8 HDi 127hp 127 → 152 bhp
Peugeot Boxer 3.0 HDi 160hp 160 → 190 bhp

Year / chassis: 2020+

EnginePowerDPF fault solution
Peugeot Boxer 2.2 BlueHDi 140hp 140 → 175 bhp
Peugeot Boxer 2.2 BlueHDi 165hp 165 → 206 bhp

Year / chassis: 2019+

EnginePowerDPF fault solution
Peugeot Boxer 2.2 BlueHDI 120hp 120 → 185 bhp
Peugeot Boxer 2.2 BlueHDI 140hp 140 → 185 bhp
Peugeot Boxer 2.2 BlueHDI 165hp 165 → 185 bhp

When is it needed?

  • DPF full / regeneration warning
  • Frequent regeneration and rising fuel use
  • Engine warning light and reduced power
  • Oil dilution and a costly DPF replacement

Typical duration: 1–2 hours

Frequently asked questions

Can a clogged DPF on the Peugeot Boxer be solved with software?
The filter and sensors are checked first; any mechanical fault is reported. Where suitable for the Peugeot Boxer, the DPF software solution is applied to the ECU with the original software backed up and verified by a road test.
Will the car pass inspection after a DPF delete?
Work on emission hardware can affect inspection and road compliance. This work is offered only for uses permitted by law, such as off-road, motorsport, export or fault diagnosis. Inspection and road compliance remain the owner's responsibility.
Does the filter have to be physically removed?
We handle the software side; physical work on the filter is done in the workshop depending on the car and your choice. If only software is changed and the filter stays in place, it will keep loading up.
Should I try cleaning first?
In most cases yes. If the filter is not yet blocked, a forced regeneration or chemical clean is the better step; we measure the condition and tell you the cheapest route.
Will fuel consumption drop?
On a car that regenerates frequently it usually does, because the extra fuel burned during regeneration cycles disappears.

Other solutions for the Peugeot Boxer

Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.

Let's find the right solution for your vehicle

Send us your vehicle details and your nearest location will get back to you.

Get a Quote Find a centre