Türkçe TREnglish ENDeutsch DEFrançais FR
Get a Quote
Tractor · Deutz-Fahr

Deutz-Fahr Agrotron Tractor Tuning and Power Upgrade

The Deutz-Fahr Agrotron is Deutz-Fahr's field tractor range. The engine control unit (ECU) software is recalibrated on the machine's own original file; the original software is backed up.

Get a Quote Find a centre On-site service

Deutz-Fahr Agrotron power remap

A power remap on the Deutz-Fahr Agrotron recalibrates the fuel quantity, injection timing, boost pressure and torque limiter maps. Manufacturers sell the same engine block at several power levels within a range, so much of the difference between them is software. The calibration respects the limits of the cooling system, transmission and PTO.

Deutz-Fahr Agrotron DPF, EGR and AdBlue fault solution

In the field, most faults come from the emission systems: a particulate filter (DPF) that fills up during low-rpm and short jobs, an EGR valve clogged with soot, and NOx sensor, pump or heater faults in the AdBlue (SCR) system. When these occur the tractor enters limp mode and work stops in the middle of harvest. The cause is diagnosed first; the software solution is applied according to the ECU type.

Tractor DPF Fault SolutionTractor EGR Fault SolutionTractor AdBlue Fault Solution

ECU and compatibility for the Deutz-Fahr Agrotron

Services with a verified solution for Deutz-Fahr in our library: Stage 1 Remap, DPF Delete, EGR Delete and AdBlue / SCR Delete. The control units we work on in Deutz-Fahr machines include BOSCH EDC17CV52, BOSCH MD1CC878C, BOSCH EDC17C53 and BOSCH EDC17CV54. The same model can carry a different ECU depending on build year and engine option, so we confirm compatibility for the Deutz-Fahr Agrotron from a photo of the ECU label or from the file read out.

Where is the difference noticed on the Deutz-Fahr Agrotron?

  • Heavy tillage with ploughs, chisels and subsoilers
  • PTO-heavy work such as baling, forage harvesting and feed mixing
  • Road haulage and hills with a loaded trailer
  • Tractors whose engine is at its limit for the implement they pull

Services available for Deutz-Fahr (tractor)

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

ECU models used in Deutz-Fahr tractors

BOSCH EDC17CV52BOSCH MD1CC878CBOSCH EDC17C53BOSCH EDC17CV54BOSCH MD1CS089BOSCH MD1CS069BOSCH EDC17CV56

Frequently asked questions

Which software services are available for the Deutz-Fahr Agrotron?
Services with a verified solution for Deutz-Fahr in our library: Stage 1 Remap, DPF Delete, EGR Delete and AdBlue / SCR Delete. We confirm on the file which of them apply to the ECU fitted to your Deutz-Fahr Agrotron.
How much power does the Deutz-Fahr Agrotron gain with a remap?
The gain depends on the engine option, the ECU type and the machine's power level within its range. Rather than quote a fixed figure, we read the original file first and tell you what increase is possible.
How do I find out which ECU my Deutz-Fahr Agrotron has?
The exact type is read from the label on the ECU or with a diagnostic tool. A photo of the label and the model year of the machine are enough.
How long does the job take, and can it be done on site?
Most ECUs are read and written through the diagnostic socket and the job is completed the same day; some units are removed and worked on the bench. Contact us for on-site service.
Can the original software be restored?
Yes. The original software is archived and the Deutz-Fahr Agrotron can be returned to its factory setting on request.
Why does the machine cut power when there is an AdBlue fault?
When the emission system detects a fault, the ECU first gives a warning; if the fault is not fixed it limits torque and engine speed in stages, and at the final stage the machine runs at idle only. This is how the system is designed to behave. Power returns once the cause is fixed or a software solution matching the ECU type is applied.
Why does DPF regeneration not complete in the field or on site?
Regeneration needs the exhaust temperature to stay high for a while; low load, idling and short work cycles do not provide that. Faults in the differential pressure sensor, the EGR or the injectors also stop regeneration. The soot load and sensor values are read first; depending on the cause we recommend a forced regeneration, cleaning or a software solution.
Does the EGR job give the machine more power?
The EGR job is not a power remap; no power gain should be expected from it alone. Because the loss of pull and the power reduction caused by a faulty EGR disappear, the machine returns to its factory output. If more power is wanted, a power remap is applied separately.

Other Deutz-Fahr models

Deutz-Fahr AgrofarmDeutz-Fahr 5 SeriesDeutz-Fahr 6 SeriesDeutz-Fahr 7 SeriesDeutz-Fahr 9 Series Deutz-Fahr · Tractor → Tractor →

Let's find the right solution for your vehicle

Send us your vehicle details and your nearest location will get back to you.

Get a Quote Find a centre