Peugeot · Power Calculator

Peugeot 2008 2013 - 2016 1.6 BlueHDi 8V 75hp Stage 1 Chip Tuning · ECU Remap

Name: Peugeot 2008 2013 - 2016 1.6 BlueHDi 8V 75hp Stage 1 Chip Tuning
Brand: Peugeot

How much bhp does Peugeot 2008 1.6 BlueHDi 8V 75hp chip tuning add?

Power goes from 75 bhp to 120 bhp — a gain of +45 bhp (60%). Torque rises from 230 Nm to 280 Nm.

Power75 → 120 bhp+45 bhp (+60%)

Torque230 → 280 Nm+50 Nm (+22%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Peugeot 2008 2013 - 2016 1.6 BlueHDi 8V 75hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Peugeot 2008 2013 - 2016 1.6 BlueHDi 8V 75hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Peugeot 2008 2013 - 2016 1.6 BlueHDi 8V 75hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Peugeot 2008 1.6 BlueHDi 8V 75hp AdBlue fault solution Peugeot 2008 1.6 BlueHDi 8V 75hp DPF fault solution Peugeot 2008 1.6 BlueHDi 8V 75hp EGR fault solution

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

Peugeot 2008 — Power Calculator

Engine	Power	Gain
1.2T Puretech 110hp	110 → 145 bhp	+35 bhp
1.2T Puretech 130hp	130 → 145 bhp	+15 bhp
1.4 e-HDI 68hp	68 → 90 bhp	+22 bhp
1.6 BlueHDi 8V 100hp	100 → 130 bhp	+30 bhp
1.6 BlueHDi 8V 120hp	120 → 140 bhp	+20 bhp
1.6 e-HDi 8V 115hp	115 → 140 bhp	+25 bhp
1.6 e-HDi 8V 92hp	92 → 115 bhp	+23 bhp
1.6 VTi 120hp	120 → 135 bhp	+15 bhp

Frequently asked questions

How much bhp does Peugeot 2008 1.6 BlueHDi 8V 75hp chip tuning add?

Power goes from 75 bhp to 120 bhp — a gain of +45 bhp (60%). Torque rises from 230 Nm to 280 Nm.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Peugeot 2008 1.6 BlueHDi 8V 75hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Peugeot 2008 1.6 BlueHDi 8V 75hp?

Yes. Our library contains a verified DPF Delete solution for the Peugeot 2008 1.6 BlueHDi 8V 75hp. Once your original file is read, compatibility is checked and the job is applied.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.