Türkçe TREnglish ENDeutsch DEFrançais FR
Get a Quote
Truck & Bus · Temsa

Temsa Maraton Bus Tuning and Power Upgrade

The Temsa Maraton is Temsa's intercity coach. The engine control unit (ECU) software is recalibrated on the vehicle's own original file; the original software is backed up.

Get a Quote Find a centre

Temsa Maraton power remap

A power remap on the Temsa Maraton recalibrates the fuel quantity, injection timing, boost pressure and torque limiter maps. On a bus the aim is to lose less speed on gradients with a full passenger load and to run the engine at lower revs. The calibration stays within the safety margin of the engine and driveline.

Temsa Maraton DPF fault solution

On buses, NOx sensor and pump faults in the AdBlue (SCR) system, a blocked particulate filter (DPF) and EGR faults put the vehicle into reduced-power mode and disrupt the service. The source of the fault is diagnosed first; the software solution is applied according to the ECU type.

Truck DPF Fault Solution

ECU and compatibility for the Temsa Maraton

Services with a verified solution for Temsa in our library: Stage 1 Remap, Speed Limiter (Vmax) Removal and DPF Delete. The control units we work on in Temsa vehicles include BOSCH EDC17C49, BOSCH EDC17CP15 and BOSCH EDC17CP52. The same model can carry a different ECU depending on build year and engine option, so we confirm compatibility for the Temsa Maraton from a photo of the ECU label or from the file read out.

Where is the difference noticed on the Temsa Maraton?

  • Long gradients with a full passenger load
  • Intercity trips with the air conditioning on
  • Shuttle and city routes with frequent stops

Services available for Temsa (bus)

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

ECU models used in Temsa trucks

BOSCH EDC17C49BOSCH EDC17CP15BOSCH EDC17CP52

Frequently asked questions

Which software services are available for the Temsa Maraton?
Services with a verified solution for Temsa in our library: Stage 1 Remap, Speed Limiter (Vmax) Removal and DPF Delete. We confirm on the file which of them apply to the ECU fitted to your Temsa Maraton.
How much power does the Temsa Maraton gain with a remap?
The gain depends on the engine option, the ECU type and the vehicle's power level within its range. Rather than quote a fixed figure, we read the original file first and tell you what increase is possible.
How do I find out which ECU my Temsa Maraton has?
The exact type is read from the label on the ECU or with a diagnostic tool. A photo of the label and the model year of the vehicle are enough.
How long does the job take, and can it be done on site?
Most ECUs are read and written through the diagnostic socket and the job is completed the same day; some units are removed and worked on the bench. Contact us for on-site service.
Can the original software be restored?
Yes. The original software is archived and the Temsa Maraton can be returned to its factory setting on request.
Why does the vehicle cut power and limit speed when there is an AdBlue fault?
When the emission system detects a fault, the ECU first gives a warning; if the fault is not fixed it reduces torque, and at the next stage it limits the vehicle speed. This is how the system is designed to behave. Power returns once the cause is fixed or a software solution matching the ECU type is applied.
Why does DPF regeneration not complete?
Regeneration needs the exhaust temperature to stay high for a while; city distribution, frequent stop-start and long idling do not provide that. Faults in the differential pressure sensor, the EGR or the injectors also stop regeneration. The soot load and sensor values are read first; depending on the cause we recommend a forced regeneration, cleaning or a software solution.
Does the EGR job give the vehicle more power?
The EGR job is not a power remap; no power gain should be expected from it alone. Because the loss of pull and the power reduction caused by a faulty EGR disappear, the vehicle returns to its factory output. If more power is wanted, a Stage 1 remap is applied separately.

Other Temsa models

Temsa SafirTemsa Prestij Temsa · Truck & Bus → Truck & Bus →

Let's find the right solution for your vehicle

Send us your vehicle details and your nearest location will get back to you.

Get a Quote Find a centre