Construction Machine · Manitou

Manitou MT 1440 Telehandler Tuning and Power Upgrade

Name: Manitou MT 1440 Telehandler Tuning and Power Upgrade
Brand: Manitou

The Manitou MT 1440 is Manitou's construction telehandler. The engine control unit (ECU) software is recalibrated on the machine's own original file; the original software is backed up.

Get a Quote Find a centre On-site service

Manitou MT 1440 power remap

A power remap on the Manitou MT 1440 recalibrates the fuel quantity, injection timing, boost pressure and torque limiter maps. On a telehandler the engine feeds both the drivetrain and the boom hydraulics; with more torque in reserve, rpm drops less when manoeuvring with a loaded boom and towing a trailer.

Manitou MT 1440 DPF, EGR and AdBlue fault solution

Telehandlers work on farms and sites in short jobs with frequent stops; in these conditions the particulate filter (DPF) cannot clean itself and blocks. With an EGR fault or a NOx sensor fault in the AdBlue (SCR) system the machine enters limp mode. The cause is diagnosed first; the software solution is applied according to the ECU type.

Construction Machine DPF Fault Solution Construction Machine EGR Fault Solution Construction Machine AdBlue Fault Solution

ECU and compatibility for the Manitou MT 1440

Services with a verified solution for Manitou in our library: Stage 1 Remap, DPF Delete, EGR Delete and AdBlue / SCR Delete. The control units we work on in Manitou machines include BOSCH EDC17C49, BOSCH MD1CC878C and BOSCH EDC17CV45. The same model can carry a different ECU depending on build year and engine option, so we confirm compatibility for the Manitou MT 1440 from a photo of the ECU label or from the file read out.

Where is the difference noticed on the Manitou MT 1440?

Stacking bales and loading feed
Manoeuvring and climbing ramps with a loaded boom
Towing a trailer and roading

Services available for Manitou (telehandler)

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

ECU models used in Manitou machines

BOSCH EDC17C49 BOSCH MD1CC878C BOSCH EDC17CV45

Frequently asked questions

Which software services are available for the Manitou MT 1440?

Services with a verified solution for Manitou in our library: Stage 1 Remap, DPF Delete, EGR Delete and AdBlue / SCR Delete. We confirm on the file which of them apply to the ECU fitted to your Manitou MT 1440.

How much power does the Manitou MT 1440 gain with a remap?

The gain depends on the engine option, the ECU type and the machine's power level within its range. Rather than quote a fixed figure, we read the original file first and tell you what increase is possible.

How do I find out which ECU my Manitou MT 1440 has?

The exact type is read from the label on the ECU or with a diagnostic tool. A photo of the label and the model year of the machine are enough.

How long does the job take, and can it be done on site?

Most ECUs are read and written through the diagnostic socket and the job is completed the same day; some units are removed and worked on the bench. Contact us for on-site service.

Can the original software be restored?

Yes. The original software is archived and the Manitou MT 1440 can be returned to its factory setting on request.

Other Manitou models

Manitou MLT 625 Manitou MLT 630 Manitou MLT 635 Manitou MLT 741 Manitou MT 1840 Manitou · Construction Machine → Construction Machine →