Mercedes-Benz Citan · 2013+
Mercedes-Benz Citan DPF Fault Solution
When the DPF (diesel particulate filter) clogs on Mercedes-Benz Citan (2013+) diesel engines, the car regenerates frequently, power is limited and a warning lamp comes on. Differential pressure and fault memory are checked first, the ECU is identified and a matching software solution is applied after an original backup.
Suitable engines for the Mercedes-Benz Citan
Year / chassis: 2013+
| Engine | Power | DPF fault solution |
|---|---|---|
| Mercedes-Benz Citan 108 CDI 75hp | 75 → 115 bhp | ✓ |
| Mercedes-Benz Citan 109 CDI 90hp | 90 → 110 bhp | ✓ |
| Mercedes-Benz Citan 111 CDI 110hp | 110 → 130 bhp | ✓ |
Year / chassis: 2 - 2021+
| Engine | Power | DPF fault solution |
|---|---|---|
| Mercedes-Benz Citan 108 CDI 75hp | 75 → 94 bhp | ✓ |
| Mercedes-Benz Citan 110 CDI 95hp | 95 → 119 bhp | ✓ |
| Mercedes-Benz Citan 112 CDI 116hp | 116 → 145 bhp | ✓ |
When is it needed?
- DPF full / regeneration warning
- Frequent regeneration and rising fuel use
- Engine warning light and reduced power
- Oil dilution and a costly DPF replacement
Typical duration: 1–2 hours
Frequently asked questions
Can a clogged DPF on the Mercedes-Benz Citan be solved with software?
The filter and sensors are checked first; any mechanical fault is reported. Where suitable for the Mercedes-Benz Citan, the DPF software solution is applied to the ECU with the original software backed up and verified by a road test.
Will the car pass inspection after a DPF delete?
Work on emission hardware can affect inspection and road compliance. This work is offered only for uses permitted by law, such as off-road, motorsport, export or fault diagnosis. Inspection and road compliance remain the owner's responsibility.
Does the filter have to be physically removed?
We handle the software side; physical work on the filter is done in the workshop depending on the car and your choice. If only software is changed and the filter stays in place, it will keep loading up.
Should I try cleaning first?
In most cases yes. If the filter is not yet blocked, a forced regeneration or chemical clean is the better step; we measure the condition and tell you the cheapest route.
Will fuel consumption drop?
On a car that regenerates frequently it usually does, because the extra fuel burned during regeneration cycles disappears.
Other solutions for the Mercedes-Benz Citan
Mercedes-Benz Citan AdBlue fault solution
Mercedes-Benz Citan EGR fault solution
Mercedes-Benz Citan Pop & Bang tuning
More about DPF Delete
Mercedes-Benz Stage 1 Chip Tuning — How Much BHP?
⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.