Ford · Power Calculator

Ford Mondeo 2000 - 2007 2.0 TDCi 130hp Stage 1 Chip Tuning · ECU Remap

Name: Ford Mondeo 2000 - 2007 2.0 TDCi 130hp Stage 1 Chip Tuning
Brand: Ford

How much bhp does Ford Mondeo 2.0 TDCi 130hp chip tuning add?

Power goes from 130 bhp to 160 bhp — a gain of +30 bhp (23%). Torque rises from 320 Nm to 390 Nm.

Power130 → 160 bhp+30 bhp (+23%)

Torque320 → 390 Nm+70 Nm (+22%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap EGR Delete DPF Delete AdBlue / SCR Delete DTC / Fault Code Removal

Get a Quote

Ford Mondeo 2000 - 2007 2.0 TDCi 130hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Ford Mondeo 2000 - 2007 2.0 TDCi 130hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

DPF Delete, EGR Delete, AdBlue / SCR Delete

Ford Mondeo 2000 - 2007 2.0 TDCi 130hp — Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes. Verified software is used for AdBlue / SCR Delete, NOx Sensor Delete and EGR Delete fault solutions.

Solutions for this vehicle

Ford Mondeo 2.0 TDCi 130hp EGR fault solution

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

EGR Delete

Software deactivation of the exhaust gas recirculation (EGR) valve control and fault codes.

DPF Delete

Software deactivation of the diesel particulate filter (DPF/FAP) functions and fault codes.

AdBlue / SCR Delete

Software deactivation of the AdBlue/SCR dosing system and its fault/warning functions.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

Ford Mondeo — Power Calculator

Engine	Power	Gain
1.6i 16v 90hp	90 → 100 bhp	+10 bhp
1.8i 16v 110hp	110 → 119 bhp	+9 bhp
1.8i 16v 125hp	125 → 135 bhp	+10 bhp
2.0 TDCi 115hp	115 → 175 bhp	+60 bhp
2.0 TDDi 115hp	115 → 153 bhp	+38 bhp
2.0 TDDi 90hp	90 → 120 bhp	+30 bhp
2.0i 16v 145hp	145 → 155 bhp	+10 bhp
2.2 TDCi 155hp	155 → 180 bhp	+25 bhp
2.5i v6 170hp	—
220 ST 226hp	—

Frequently asked questions

How much bhp does Ford Mondeo 2.0 TDCi 130hp chip tuning add?

Power goes from 130 bhp to 160 bhp — a gain of +30 bhp (23%). Torque rises from 320 Nm to 390 Nm.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Ford Mondeo 2.0 TDCi 130hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

Is DPF Delete possible on the Ford Mondeo 2.0 TDCi 130hp?

Yes. Our library contains a verified DPF Delete solution for the Ford Mondeo 2.0 TDCi 130hp. Once your original file is read, compatibility is checked and the job is applied.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.