Mercedes-Benz · Power Calculator

Mercedes-Benz GLS 2019+ 450 (3.0T) 367hp Stage 1 Chip Tuning · ECU Remap

Name: Mercedes-Benz GLS 2019+ 450 (3.0T) 367hp Stage 1 Chip Tuning
Brand: Mercedes-Benz

How much bhp does Mercedes-Benz GLS 450 (3.0T) 367hp chip tuning add?

Power goes from 367 bhp to 420 bhp — a gain of +53 bhp (14%). Torque rises from 500 Nm to 590 Nm.

Power367 → 420 bhp+53 bhp (+14%)

Torque500 → 590 Nm+90 Nm (+18%)

Figures are typical ranges; exact results depend on the vehicle's hardware and dyno measurement.

Stage 1 Remap Stage 2 Remap Pop & Bang Speed Limiter (Vmax) Removal DTC / Fault Code Removal

Get a Quote

Mercedes-Benz GLS 2019+ 450 (3.0T) 367hp

Book an appointment Find a centre

Reversible: Yes, the original software is kept

Mercedes-Benz GLS 2019+ 450 (3.0T) 367hp — Stage 1 Remap

Stage 1 re-calibrates the ECU software — boost, fuelling and ignition maps — within the factory hardware's safe tolerances. No hardware changes are required.

Solutions for this vehicle

Mercedes-Benz GLS 450 (3.0T) 367hp Pop & Bang tuning

Stage 1 Remap

Software that optimises the engine's power and torque maps within safe limits.

Stage 2 Remap

Advanced software matched to hardware upgrades such as a sport exhaust or induction kit.

Pop & Bang

Software that creates exhaust crackle on lift-off.

Speed Limiter (Vmax) Removal

Removing the factory top-speed limiter from the software.

DTC / Fault Code Removal

Switching off selected diagnostic trouble codes (DTC) in the ECU software.

Mercedes-Benz GLS — Power Calculator

Engine	Power	Gain
350d 286hp	286 → 380 bhp	+94 bhp
400d 331hp	331 → 380 bhp	+49 bhp
580 (4.0T) 490hp	490 → 570 bhp	+80 bhp
600 - 558hp	—
63 AMG V8 Bi-Turbo 612hp	612 → 690 bhp	+78 bhp

Frequently asked questions

How much bhp does Mercedes-Benz GLS 450 (3.0T) 367hp chip tuning add?

Power goes from 367 bhp to 420 bhp — a gain of +53 bhp (14%). Torque rises from 500 Nm to 590 Nm.

Will chip tuning damage the engine?

No. Values stay inside the safety margin the manufacturer leaves; engine, gearbox and turbo limits are not exceeded. Every file is verified with a road test and data logging. If the car needs maintenance first (worn injectors, blocked filter, weak clutch) we tell you before starting.

Will my fuel consumption go up?

With the same driving style it usually drops, because you hold the same speed at lower revs and less throttle. If you use the extra power, consumption naturally rises. It is down to your right foot.

How long does it take? Do I leave the car?

Most cars take 1–2 hours and you get the car back the same day; no need to leave it. Some models need the ECU removed, which takes longer — we tell you when booking.

Can I go back to stock later?

Yes. The original file is read and archived before any work. We restore the factory software free of charge whenever you ask.

Does it void my warranty?

Changing engine software can affect the manufacturer warranty. If a dealer finds a fault to be software related, they may refuse that claim. We want you to decide knowing this. Your original file stays with us and can be restored before a dealer visit.

Will it pass the roadworthiness test?

Stage 1 power software does not touch emission hardware. Work on emission systems is offered only for uses permitted by law; road use and inspection compliance remain the owner's responsibility.

How much does Mercedes-Benz GLS 450 (3.0T) 367hp chip tuning cost?

Price depends on the vehicle, the ECU and the solution chosen. Send us your vehicle details on WhatsApp and we will quote straight away. Inspection and measurement are free.

How is the work done?

We scan for faults and read the original software first. The file is adapted to your car's hardware, written, and verified on a road test. The original is archived.

⚠ Software work on emission systems is offered only for uses permitted by applicable law (motorsport, off-road use, export, fault diagnosis, etc.). Road use and inspection compliance of the vehicle remain the owner's responsibility.